7 Signs Your Chimney Needs Repair Before Heating Season
Chimney Repair7 Signs Your Chimney Needs Repair Before Heating Season
•Published: 15 NOV, 2026

7 Signs Your Chimney Needs Repair Before Heating Season

The clearest signs your chimney needs repair are crumbling or missing mortar between the bricks, bricks that flake or lose their faces, a cracked crown, a missing or rusted cap, white staining on the masonry, water stains on the ceiling or wall near the chimney, and a stack that leans. Most can be seen from the ground with binoculars. Each one lets water into the masonry, and water is what turns a small defect into a rebuild.
This guide describes each sign, explains why New England winters make chimney damage worse, separates the urgent problems from the ones that can be scheduled, and outlines what a repair involves.

What are the signs your chimney needs repair?

These seven signs cover the outside of the chimney and the rooms next to it.
  • Mortar joints that are recessed, cracked, sandy or missing
  • Bricks with flaking faces or pieces on the roof and ground below, known as spalling
  • Cracks in the concrete or mortar crown that caps the top of the chimney
  • A chimney cap that is missing, loose or rusted through
  • White, powdery staining on the brick
  • Water stains or peeling paint on the ceiling or wall beside the chimney
  • A chimney that leans or has pulled away from the house
Indoors, also watch for bits of flue tile in the firebox, rust on the damper and a damp or musty smell from the fireplace after rain.

What does chimney mortar deterioration look like?

It looks like joints that have worn back from the face of the brick. Chimney mortar deterioration is the most common defect, because mortar is softer than brick by design and weathers first.
  • Joints you could fit a key or coin into
  • Mortar that crumbles when scraped
  • Gaps where a joint has fallen out entirely
  • Plants or moss rooted in the joints
  • Loose bricks near the top of the stack
Open joints let rain soak into the center of the chimney. Renewing the joints, called repointing or tuckpointing, is far less work than rebuilding a chimney that was left open for years.

Why does a cracked chimney crown matter?

Because the crown is the roof of the chimney. It is the sloped slab at the top that sheds water away from the flue and over the edge of the brick. A cracked chimney crown lets water run straight down inside the masonry.
  • Hairline cracks widen every winter
  • Water entering at the top damages the bricks and mortar below it
  • A crown that is flat or flush with the brick does not shed water well
  • A missing cap lets rain, snow, leaves and animals into the flue
Small cracks can often be sealed. A crown that is broken up or badly formed is normally removed and rebuilt.

Why do New England winters make chimney damage worse?

Because of freezing and thawing. Brick and mortar absorb water, and water expands when it freezes. A chimney stands above the roof with every side exposed, so it goes through more of these cycles than any wall of the house.
  • Water enters through a crack or open joint
  • It freezes, expands and widens the opening
  • The thaw lets in more water, and the cycle repeats
  • Faces of bricks pop off and mortar loosens
  • By spring, a defect that was cosmetic in the fall can be structural
This is the reason for chimney repair before winter. Mortar and crown repairs also need mild temperatures to cure properly, which makes September and October the practical window in Massachusetts and New Hampshire.

Is a damaged chimney dangerous?

It can be. Some signs are about water, and others are about fire and exhaust gases. Treat the second group as urgent.
  • Urgent: cracked or missing flue liner pieces, a leaning chimney, loose bricks at the top, smoke entering the room
  • Soon: open mortar joints, a cracked crown, a missing cap, active leaks
  • Monitor: light white staining with no other damage
A damaged liner can let heat and combustion gases, including carbon monoxide, reach the framing and the living space. Do not use a fireplace, wood stove or appliance flue with known liner damage until it has been evaluated. Fire safety organizations recommend having chimneys inspected once a year. Cleaning the flue is a separate job for a chimney sweep.

What does chimney repair involve?

It depends on which part has failed. Most repairs fall into a few types, and several are often done together.
  • Repointing: removing loose mortar and packing the joints with new mortar
  • Replacing individual damaged bricks
  • Sealing or rebuilding the crown
  • Installing or replacing the cap
  • Repairing or replacing flashing where the chimney meets the roof
  • Rebuilding the upper courses, or the whole stack above the roof, when the masonry is too far gone
  • Applying a breathable water repellent made for masonry after repairs
Leaks at the base of the chimney usually trace to the metal flashing, which JM Exteriors Roofing Siding covers in its article on chimney flashing and leaks. The company lists chimney repair among its roofing and exterior services. Ask which of the repairs above an inspection finds necessary, and ask for photos.

Frequently asked questions about chimney repair

What is the white stain on my chimney?

It is efflorescence: salts left on the surface when water moves through the masonry and evaporates. The stain itself is harmless, but it shows that the chimney is absorbing water, so the source of the moisture should be found.

Can a chimney be repaired in winter?

Emergency work can be done, but mortar and crown materials need temperatures above freezing to cure well. Planned masonry repairs are best scheduled from spring through fall. Caps and flashing are less sensitive to temperature.

How often should a chimney be inspected?

Once a year is the general recommendation, ideally before the heating season. Have it checked sooner after a chimney fire, a lightning strike, an earthquake or a severe storm, or when you see any of the signs above.

Should brick chimneys be sealed?

A breathable water repellent made for masonry can reduce how much water the brick absorbs. It should be applied only after cracks and joints are repaired. Paint and non-breathable sealers trap moisture and can speed up damage.

Have your chimney checked by JM Exteriors Roofing Siding

JM Exteriors Roofing Siding is a roofing and siding contractor based in Lowell, MA that also offers chimney repair. It serves Lowell, Westford, Andover, Tewksbury and Chelmsford in Massachusetts, and Nashua, Londonderry, Derry and Manchester in New Hampshire, with local pages such as roofing in Chelmsford, MA. To have your chimney looked at before the heating season, call 603-966-8281 or contact JM Exteriors Roofing Siding.