What Is Board and Batten Siding? Materials, Pros and Cons
What is board and batten siding? It is a vertical siding made of wide boards set side by side, with narrow strips called battens fastened over the joints between them. The battens cover the gaps and give the wall its pattern of raised vertical lines. It began as a practical way to side barns with plain lumber, and today it is made in fiber cement, engineered wood, vinyl and metal as well as wood. It is used on whole houses and as an accent on gables, dormers and entries.
This guide explains how it is built, the materials available, its advantages and drawbacks, where it suits a house and what the installation has to get right.
How is board and batten siding built?
It is built in two layers over the weather barrier of the wall: the boards first, then the battens.
- Wide boards or panels run vertically from the bottom of the wall to the top
- A narrow batten covers each joint, or is spaced evenly across a panel to create the same look
- Horizontal blocking or furring strips behind the siding give vertical boards something solid to fasten to
- Flashing at the top of windows, doors and horizontal breaks sends water out
- Trim finishes the corners, base and openings
With wood, the batten is fastened so the boards can swell and shrink beneath it. With panel products, the battens are mostly decorative, and the panel joints are what need careful sealing and flashing.
What materials does board and batten come in?
It comes in most of the materials used for siding. The look is similar from the street, and the upkeep is very different.
- Wood, such as cedar or pine: the traditional choice, with natural grain, and the most maintenance
- Fiber cement board and batten: panels with separate batten strips, stable, paintable and resistant to rot and insects
- Engineered wood: lighter than fiber cement, factory primed or finished
- Vinyl: formed panels with the batten shape molded in, low maintenance and limited in color depth
- Metal: steel or aluminum panels with raised ribs, crisp lines and a long-lasting finish
JM Exteriors Roofing Siding states on its site that it installs fiber-cement siding, board-and-batten siding and metal siding. Ask which board and batten materials are available for your project and how each is finished. For another low-maintenance route to a wood appearance, see the company's article on vinyl siding that looks like wood.
What are the advantages of board and batten siding?
Its advantages are appearance and good water shedding. Vertical siding gives rain no horizontal ledges to sit on.
- Vertical lines make a wall look taller and suit both farmhouse and modern designs
- Water runs straight down the face
- The shadow lines of the battens add depth that flat siding lacks
- It mixes well with lap siding, shingles or stone
- In fiber cement or metal it needs little upkeep beyond washing
- Battens and boards can be replaced one at a time if damaged
It also holds strong colors well. Dark charcoal, deep green and black are common choices, as the company notes in its piece on modern dark exterior house colors.
What are the drawbacks?
The drawbacks are labor and detailing. Looking at board and batten siding pros and cons side by side, most of the cons come from installation, not from the look.
- It usually takes more labor than horizontal lap siding, since there are more pieces and more cuts
- Vertical joints and the tops of battens must be flashed and sealed with care
- Wood versions need regular painting or staining and can cup or split
- Battens add more edges where paint can fail first
- A whole house in one vertical pattern can look busy on some designs
- Repairs must match batten spacing exactly to stay invisible
None of these is a reason to avoid it. They are reasons to choose the material carefully and to ask how the installer handles each detail.
Where does board and batten look best on a house?
It works on the whole house or in selected areas, depending on the style of the home.
- Whole house: farmhouse, cottage and modern designs with simple shapes
- Gables and dormers above horizontal siding
- Entry porches and bump-outs
- Second stories over a first story in lap siding, brick or stone
- Garages and additions, to set them apart from the main house
Batten spacing changes the effect. Closer spacing reads as more traditional, and wider spacing as more modern. On New England colonials and capes, an accent in the gables is a common way to add interest without changing the character of the house.
What must the installation get right in New England?
Water management and movement. Wind-driven rain, snow piled against walls and freezing nights test every joint.
- A continuous water-resistive barrier behind the siding
- Flashing above every window, door and horizontal trim board
- Clearance between the bottom of the siding and roofs, decks and the ground
- Sealed or primed cut edges, following the manufacturer's instructions
- Fasteners and spacing that allow the material to expand and contract
- Solid blocking so vertical pieces are fastened along their full height
Each manufacturer publishes installation requirements, and following them is normally a condition of the product warranty.
Frequently asked questions about board and batten siding
Is board and batten siding more expensive than lap siding?
It usually costs more to install, because it involves more pieces, more cuts and more detailing. The difference depends on the material and the shape of the house, so ask for a written estimate that compares both options.
Does board and batten siding leak?
Not when it is installed correctly. The siding sheds most of the water, and the water-resistive barrier and flashing behind it handle what gets past. Leaks trace to missing flashing or unsealed joints, not to the vertical layout.
Can board and batten be mixed with other siding?
Yes. It is often combined with horizontal lap siding, shingles or stone. Using it on gables, dormers or an entry is a common way to add contrast while keeping the rest of the house simple.
How long does board and batten siding last?
That depends on the material and the upkeep. Fiber cement and metal versions can last for decades with little maintenance, while wood lasts well only if it is kept painted or stained and the joints are kept sealed.
Plan your siding project with JM Exteriors Roofing Siding
JM Exteriors Roofing Siding is a roofing and siding contractor based in Lowell, MA. Siding installation, replacement and repair are among its roofing and siding services. It serves Lowell, Westford, Andover, Tewksbury and Chelmsford in Massachusetts, and Nashua, Londonderry, Derry and Manchester in New Hampshire. To talk through siding options for your home, call 603-966-8281 or contact JM Exteriors Roofing Siding.
