What Is Roof Underlayment and Why Does Your Roof Need It?
Roof InstallationWhat Is Roof Underlayment and Why Does Your Roof Need It?
•Published: 05 OCT, 2026

What Is Roof Underlayment and What Does It Do?

What is roof underlayment? It is the protective layer installed on the roof deck under the shingles. It sheds water that gets past the shingles from wind-driven rain or ice, protects the deck during installation and adds a second line of defense at the edges, valleys and around openings. The common types are felt, synthetic and self-adhered ice and water barrier, and most New England roofs use more than one.
This guide explains what roof underlayment does, how the types differ, where each one usually goes and what to ask about it when you get a replacement estimate.

Why does a roof need underlayment if it has shingles?

Because shingles are not a fully sealed surface. They overlap to shed water, and wind, ice and age can push water under them.
  • Wind-driven rain can blow under the edges of shingles
  • Ice dams at the eaves can back water up under the roofing
  • Small gaps at valleys, vents and walls let water in
  • The deck needs protection from rain while the roof is being installed
  • Many shingle manufacturers require underlayment for their warranty
Underlayment does not replace good shingles and flashing. It catches what they miss and gives the roof time before a small problem becomes a leak inside the house.

What are the main types of roofing underlayment?

The three main roofing underlayment types are asphalt-saturated felt, synthetic sheets and self-adhered membranes. Each one has a job.
  • Felt: the traditional paper-based sheet soaked in asphalt, still used on some roofs
  • Synthetic: a woven or spun plastic sheet, lighter and stronger than felt, and more tear-resistant on a windy day
  • Self-adhered ice and water barrier: a rubberized membrane with a sticky back that seals to the deck and around nails
The type of shingle on top matters less than you might think here. The company's guide to types of roof shingles explains the surface choices; underlayment is about what protects the deck below them.

What is the difference between synthetic vs felt underlayment?

Synthetic vs felt underlayment comes down to strength, weight and how each behaves while the roof is open. Many roofers now use synthetic as the main layer.
  • Synthetic resists tearing and wrinkling better when it gets wet
  • Synthetic is lighter, so rolls cover more area per trip up the ladder
  • Synthetic often has a walkable, slip-resistant surface
  • Felt can absorb moisture and wrinkle, which can show through thin shingles
  • Felt is a familiar product with a long track record
Neither one is a waterproof seal on its own. Both depend on proper overlaps and fastening.

Where does ice and water shield go on a roof?

On a New England roof, ice and water shield usually goes where water is most likely to back up: along the eaves, in valleys and around openings.
  • Along the eaves, extending up the roof past the inside face of the exterior wall
  • In valleys, where two slopes meet and water concentrates
  • Around chimneys, skylights and vents
  • Along walls where the roof meets siding
  • On low-slope sections where water drains slowly
Building codes in cold-climate areas commonly require an ice barrier at the eaves, but the exact rule depends on where you live. Your town's building department can confirm what applies.

What are the signs that underlayment has failed?

Signs that underlayment has failed usually show up as leaks or deck damage that the shingles alone do not explain.
  • Leaks during wind-driven rain or ice dams, with shingles that look intact
  • Water stains on the roof boards seen from the attic
  • Soft, dark or delaminating decking near the eaves or valleys
  • Underlayment that is brittle, torn or missing when shingles are lifted
  • Wrinkles or ridges showing through the shingles
Underlayment is replaced together with the shingles. If the roof is old enough for the underlayment to have failed, the whole roof is usually close to replacement too.

What should you ask about underlayment in a roofing estimate?

Ask what type will be installed, where the ice barrier will go and how far it will extend. These details should be written in the estimate.
  • Which underlayment will cover the main field of the roof
  • Where ice and water barrier will be installed, and how far up from the eaves
  • Whether valleys and walls will get a self-adhered membrane
  • How flashing will lap over or under the underlayment
  • Whether the plan meets the shingle manufacturer's requirements
JM Exteriors Roofing Siding lists roofing installation and roofing replacement among its roofing services, and its site notes that each shingle and underlayment layer is positioned to guard against leaks and drafts.

Frequently asked questions about roof underlayment

Can you replace underlayment without replacing the shingles?

Not in practice for a whole roof. Underlayment sits under the shingles, so reaching it means removing them. Small areas can be repaired during a shingle repair, but large failures are handled with a full roof replacement.

How long does roof underlayment last?

Underlayment is meant to last as long as the roof covering above it, as long as it stays protected. Left exposed to sun and weather for a long time during installation, it can degrade, which is why shingles should go on promptly.

Is ice and water shield needed on the whole roof?

Usually not. It is most important at the eaves, valleys, walls and openings. Some low-slope roofs or very exposed homes use it more widely, and a roofer can explain what your roof needs.

Does underlayment affect attic ventilation?

Underlayment does not replace ventilation and does not block it when installed correctly. Self-adhered membranes are vapor resistant, so a balanced intake and exhaust ventilation system remains important for the attic.

Ask JM Exteriors Roofing Siding about your new roof

JM Exteriors Roofing Siding is a roofing and siding contractor based in Lowell, MA, offering roofing installation, replacement and repair, siding, gutters and chimney repair. It serves Lowell, Westford, Andover, Tewksbury and Chelmsford in Massachusetts, and Nashua, Londonderry, Derry and Manchester in New Hampshire, with local pages such as roofing in Chelmsford, MA. To talk about what goes into your roof, call 603-966-8281 or contact JM Exteriors Roofing Siding.