Metal Siding for Homes: Is It a Good Fit for Your House?
Metal siding for homes is a durable, low-maintenance option that is no longer limited to barns and commercial buildings. Steel and aluminum panels resist rot, insects and fire, come with long-lasting factory finishes and suit both modern and farmhouse designs. The trade-offs are possible dents, a higher cost than basic vinyl and the need for careful installation around windows, doors and corners.
This guide covers the types of metal siding, the styles available, how it handles New England weather, common concerns such as noise and dents, and the questions to ask before choosing it.
What types of metal siding are used on homes?
Most residential metal siding is steel or aluminum. Each has its own strengths.
- Steel: strong and dent-resistant, coated to resist rust, often the choice for exposed or busy areas
- Aluminum: lighter and naturally rust-resistant, but dents more easily than steel
- Factory finishes: baked-on coatings in solid colors or wood-grain patterns
- Gauge: thicker panels resist dents and waves better than thin ones
Steel vs aluminum siding is mostly a question of strength and setting. Steel holds up better to impacts, while aluminum's resistance to corrosion makes it common near the coast.
What styles of metal siding are available?
Metal siding now comes in many profiles, from traditional lap to sleek vertical panels. Modern metal siding styles are a big part of its recent popularity.
- Horizontal lap boards that resemble clapboard
- Vertical panels and board and batten profiles
- Standing seam wall panels with clean, continuous lines
- Corrugated and ribbed panels for a farmhouse or industrial look
- Wood-grain finishes that imitate natural boards
Metal often works best in combination. A popular approach is metal on part of the house with another material elsewhere, such as vertical metal on a gable and lap siding below. The company's post on board and batten siding explains the vertical look, and its guide to modern dark exterior house colors shows how deep tones are being used on today's exteriors.
What are the strengths of metal siding in New England?
Its strengths are durability and low upkeep in a climate with snow, rain and big temperature swings.
- Does not rot, crack from moisture or attract insects
- Is noncombustible
- Holds factory color well, with no regular painting
- Sheds snow and rain easily
- Is light compared with masonry or fiber cement
- Can be recycled at the end of its life
With a proper weather-resistant barrier and flashing behind it, metal siding protects the wall well. As with any siding, the work around openings and corners decides how well it keeps water out.
What are the drawbacks of metal siding?
The main drawbacks are dents, cost and the care needed in installation. They are manageable but worth weighing.
- Can dent from hail, balls, ladders or lawn equipment, especially thin aluminum
- Scratches through the finish on steel should be touched up to prevent rust
- Usually costs more than basic vinyl siding
- Expands and contracts with temperature, so panels must be fastened to allow movement
- Repairs may require matching a factory color that has faded slightly
Is metal siding noisy in the rain?
Not usually. Is metal siding noisy is a common worry, but rain mostly falls on the roof, not the walls, and siding is installed over sheathing and a barrier that dampen sound.
- Walls receive far less direct rain than roofs
- Sheathing and insulation behind the siding absorb most sound
- Wind-driven hail may be heard more than on vinyl
- Panels fastened to allow movement avoid popping sounds as they warm and cool
What should you ask before choosing metal siding?
Ask about the metal, the profile, the finish and the details. Written answers make it easier to compare offers.
- Is the panel steel or aluminum, and what is its gauge?
- What finish is used, and what does the manufacturer's finish warranty cover?
- How will corners, windows, doors and the roof line be trimmed and flashed?
- How are the panels fastened to allow for expansion?
- How would a damaged panel be replaced later?
JM Exteriors Roofing Siding names metal siding among the siding it installs, along with fiber cement and board and batten. Ask which metal options it recommends for your house.
Frequently asked questions about metal siding
How long does metal siding last?
Metal siding typically lasts for decades when it is installed well and its finish is maintained. The factory coating usually determines how long it looks its best. Check the manufacturer's warranty on the finish for the product you choose.
Does metal siding rust?
Aluminum does not rust. Steel is coated to resist rust, but it can rust where the coating is scratched through or at cut edges that were not treated. Touching up scratches and keeping debris off the bottom edges helps prevent it.
Can metal siding be installed over old siding?
Sometimes, but removing the old siding is often better. Removal lets the installer check and repair the sheathing and install a new weather-resistant barrier. An installer can tell you what is possible on your house.
Is metal siding a good choice for a traditional house?
It can be. Horizontal lap profiles and wood-grain finishes give a traditional look. Many homeowners with traditional houses use metal only as an accent, such as on a porch gable or addition.
Talk to JM Exteriors Roofing Siding about metal siding
JM Exteriors Roofing Siding is a roofing and siding contractor based in Lowell, MA, that installs metal, fiber cement and board and batten siding, as well as roofing, gutters and chimney repair. It serves Lowell, Westford, Andover, Tewksbury and Chelmsford in Massachusetts, and Nashua, Londonderry, Derry and Manchester in New Hampshire. See its siding and roofing services, call 603-966-8281 or contact JM Exteriors Roofing Siding for a free estimate.
